Netgear M4300-28G-PoE+ Managed 10G Ethernet (100/1000/10000) Power over Ethernet (PoE) 1U Zwart
Netgear M4300-28G-PoE+, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az, Managed, 10G Ethernet (100/1000/10000), 1U, Zwart, RJ-45
24x Gigabit PoE+ 550W PSU, SFP+, 10 Gigabit RJ45, 128 Gbps, VLAN, AXC761, AXC763
24x Gigabit PoE+ 550W PSU, SFP+, 10 Gigabit RJ45, 128 Gbps, VLAN, AXC761, AXC763
Veilig en eenvoudig online betalen
Snelle levering
Volg uw bestelling via track&trace
Netgear M4300-28G-PoE+. Switch type: Managed. Type basis-switching RJ-45 Ethernet-poorten: 10G Ethernet (100/1000/10000), Console port: RJ-45, Copper ethernet cabling technologie: 10GBASE-T. Netwerkstandaard: IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az. MAC-adrestabel: 16000 entries, Switchingcapaciteit: 128 Gbit/s, Throughput: 357 Mpps. Ondersteunde beveiligingsalgoritmen: HTTPS, SNMP, SSH
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking
- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility
- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity
- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection
- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services
- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management
- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
Industry leading warranty
- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking
- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
Higher flexibility
- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
Lower complexity
- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
Investment protection
- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
Secure services
- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
Industry standard management
- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
Industry leading warranty
- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
| |
Switch type: | Managed |
Quality of Service (QoS): | |
Multicast-ondersteuning: | |
| |
Aantal basis-switching RJ-45 Ethernet-poorten: | 2 |
Type basis-switching RJ-45 Ethernet-poorten: | 10G Ethernet (100/1000/10000) |
Aantal moduleslots SPF+: | 2 |
Console port: | RJ-45 |
Copper ethernet cabling technologie: | 10GBASE-T |
Aantal USB 2.0-poorten: | 1 |
| |
Netwerkstandaard: | IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az |
DHCP server: | |
IP routing: | |
IGMP snooping: | |
10G support: | |
VLAN=ondersteuning: | |
Private VLAN: | |
| |
MAC-adrestabel: | 16000 entries |
Switchingcapaciteit: | 128 Gbit/s |
Throughput: | 357 Mpps |
Latentie (10 Gbps): | 2,74 µs |
Aantal VLANs: | 4096 |
| |
Ondersteunde beveiligingsalgoritmen: | HTTPS, SNMP, SSH |
Access Control List (ACL): | |
SSH/SSL support: | |
BPDU filtering / bescherming: | |
| |
Rack-montage: | |
Formaat: | 1U |
Kleur van het product: | Zwart |
Ventilator(en): | 1 |
| |
Stapelbaar: | |
Frequentie van processor: | 800 MHz |
Intern geheugen: | 1024 MB |
Flash memory: | 256 MB |
Geluidsniveau: | 39,8 dB |
Packet buffergeheugen: | 16 MB |
| |
AC invoer voltage: | 110-240 V |
Vermogenstoevoer inclusief: | |
Typisch stroomverbruik: | 577 W |
Vermogensverbruik (max): | 833,2 W |
Redundante voeding: | |
Aantal voedingen: | 1 |
| |
Power over Ethernet (PoE): | |
Aantal Power over Ethernet plus (PoE +)-poorten: | 24 |
Totaal Power over Ethernet (PoE)-budget: | 480 W |
| |
Warmtedissipatie: | 196988 BTU/h |
| |
Gewicht: | 5,09 kg |
GSM4328PA-100NES
2024-05-15
Data papier
- Switch type
- Managed
- Warmtedissipatie
- 196988 BTU/h
- Quality of Service (QoS)
- Ja
- Ventilator(en)
- 1
- Vormfactor
- 1U
- Aantal basis-switching RJ-45 Ethernet-poorten
- 2
- Geluidsniveau
- 39,8 dB
- Kleur van het product
- Zwart
- 10G support
- Ja
- Rack-montage
- Ja
- Frequentie van processor
- 800 MHz
- Access Control List (ACL)
- Ja
- Vermogensverbruik (max)
- 833,2 W
- Intern geheugen
- 1024 MB
- SSH/SSL support
- Ja
- VLAN=ondersteuning
- Ja
- Gewicht
- 5,09 kg
- Stapelbaar
- Ja
- Vermogenstoevoer inclusief
- Ja
- Flash memory
- 256 MB
- AC-ingangsspanning
- 110-240 V
- Console port
- RJ-45
- Stroomverbruik (typisch)
- 577 W
- Multicast-ondersteuning
- Ja
- Type basis-switching RJ-45 Ethernet-poorten
- 10G Ethernet (100/1000/10000)
- Totaal Power over Ethernet (PoE)-budget
- 480 W
- Redundante voeding
- Ja
- DHCP server
- Ja
- IP routing
- Ja
- Aantal USB 2.0-poorten
- 1
- IGMP snooping
- Ja
- Aantal Power over Ethernet plus (PoE +)-poorten
- 24
- Ondersteunde beveiligingsalgoritmen
- HTTPS, SNMP, SSH
- MAC-adrestabel
- 16000 entries
- Latentie (10 Gbps)
- 2,74 µs
- Aantal voedingen
- 1
- Switchingcapaciteit
- 128 Gbit/s
- Private VLAN
- Ja
- Koperen ethernetbekabelingstechnologie
- 10GBASE-T
- Throughput
- 357 Mpps
- BPDU filtering / bescherming
- Ja
- Netwerkstandaard
- IEEE 802.1x, IEEE 802.3ad, IEEE 802.3az
- Aantal VLANs
- 4096
- Aantal moduleslots SPF+
- 2
- Power over Ethernet (PoE)
- Ja
- Packet buffergeheugen
- 16 MB
Commentaar (0)
Geen klantenbeoordelingen op het moment.